In accordance with 22 CFR 121.8—

(1) A major component includes any assembled element that forms a portion of an end item without which the end item is inoperable. Examples of major components are airframes, tail sections, transmissions, tank treads, and hulls;

(2) A minor component includes any assembled element of a major component; and

(3) Examples of parts are rivets, wires, and bolts.

(1) The 21 categories of items on the United States Munitions List (USML) can be found at http://www.pmddtc.state.gov/regulations_laws/documents/official_itar/ITAR_Part_121.pdf. Where applicable, the categories also contain a statement with regard to the coverage of components and parts of items included in a category. For example, a category may include all components and parts of covered items, or only those components and parts specifically designed or modified for military use.

(2) In addition to the list of covered items, the USML provides explanation of terms needed to determine whether a particular item is or is not covered by the USML.

(3) Within DoD, the experts on export control and the USML are in the Defense Technology Security Administration (DTSA).

(i) Official authorities and responsibilities of DTSA are in DoD Directive 5105.72, available at http://www.dtic.mil/whs/directives/corres/html/510572.htm.

(ii) Additional information on DTSA and a correspondence link are available at http://www.dod.mil/policy/sections/policy_offices/dtsa/index.html.

(c) Send a copy of the report to the Office of the Principal Director, Defense Pricing, Contracting, and Acquisition Policy (Contract Policy) (DPCAP/CP) via email at osd.pentagon.ousd-a-s.mbx.asda-dp-c-contractpolicy@mail.mil.

Forward any information indicating that a firm, a subsidiary of a firm, or any other firm that owns or controls the firm, may be owned or controlled by the government of a country that is a state sponsor of terrorism, through agency channels, to DPCAP/CP via email at osd.pentagon.ousd-a-s.mbx.asda-dp-c-contractpolicy@mail.mil.

(1) Forward any information required in accordance with 225.772-3 or requests for an exception to DPCAP/CP via email at osd.pentagon.ousd-a-s.mbx.asda-dp-c-contractpolicy@mail.mil.

(2) Consult with DPCAP/CP, as required in accordance with 225.772-3(c)(2), via email at osd.pentagon.ousd-a-s.mbx.asda-dp-c-contractpolicy@mail.mil.

When a contracting office anticipates placement of a contract for performance outside the United States and Canada, and the contracting office is not under the jurisdiction of a command for the country involved, the contracting office shall maintain liaison with the cognizant contract administration office (CAO) during preaward negotiations and postaward administration. The cognizant CAO can be found at http://home.dcma.mil/cassites/district.htm. The CAO will provide pertinent information for contract negotiations, effect appropriate coordination, and obtain required approvals for the performance of the contract.

(d)(i) The Canadian Commercial Corporation uses provisions in contracts with Canadian or U.S. concerns that give DoD the same production rights, data, and information that DoD would obtain in contracts with U.S. concerns.

(ii) The Government of Canada will provide the following services under contracts with the Canadian Commercial Corporation without charge to DoD:

(A) Contract administration services, including—

(1) Cost and price analysis;

(2) Industrial security;

(3) Accountability and disposal of Government property;

(4) Production expediting;

(5) Compliance with Canadian labor laws;

(6) Processing of termination claims and disposal of termination inventory;

(7) Customs documentation;

(8) Processing of disputes and appeals; and

(9) Such other related contract administration functions as may be required with respect to the Canadian Commercial Corporation contract with the Canadian supplier.

(B) Audits. The Public Works and Government Services Canada (PWGSC) performs audits when needed, for contracts overseen by the Canadian Commercial Corporation in accordance with international agreement.

(C) Inspection. The Department of National Defence (Canada) provides inspection personnel, services, and facilities, at no charge to DoD departments and agencies (see DFARS 225.870-7).

(iii) In accordance with DPAP Policy Memorandum dated June 5, 2013, PWGSC will perform audits without charge to DoD, including accounting system and interim voucher reviews, when needed for—

(A) DoD contracts awarded directly to Canadian firms;

(B) Subcontracts with Canadian firms under such direct contracts with Canadian firms; and

(C) Subcontracts with Canadian firms under DoD contracts with U.S. contractors.

(1) Assign contract administration in accordance with DFARS Part 242. When the Defense Contract Management Agency will perform contract administration in Canada, name in the contract the following payment office for disbursement of DoD funds (DoD Department Code: 17-Navy; 21-Army; 57-Air Force; 97-all other DoD components), whether payment is in Canadian or U.S. dollars:

(2) The following procedures apply to cost-reimbursement type contracts:

(i) The PWGSC automatically arranges audits on contracts with the Canadian Commercial Corporation. Upon advice from PWGSC, the Canadian Commercial Corporation certifies the invoice and forwards it with Standard Form (SF) 1034, Public Voucher, to the administrative contracting officer for further processing and transmittal to the disbursing office.

(ii) For contracts placed directly with Canadian firms, the administrative contracting officer requests audits from the PWGSC, Ottawa, Ontario, Canada. Route requests for audit of non-Canadian Commercial Corporation contracts and subcontracts with Canadian contractors through the cognizant contract management office of the Defense Contract Management Agency.

(A) Within 25 days of the date of the audit request, PWGSC will provide—

An acknowledgement of receipt form;

An estimate of completion form; and

(3) A single point of contact to report the status of audit requests and the progress of audits.

(B) Audits will be completed within 24 months of the requested date for post-award audits.

(C) PWGSC will provide information to support the determination that the price is fair and reasonable.

(D) The PWGSC—

(1) Approves invoices on a provisional basis pending completion of the contract and final audit;

(2) Forwards these invoices, accompanied by SF 1034, Public Voucher, to the administrative contracting officer for further processing and transmittal to the disbursing officer; and

(3) Furnishes periodic advisory audit reports directly to the administrative contracting officer.

(A) Approves invoices on a provisional basis pending completion of the contract and final audit;

(B) Forwards these invoices, accompanied by SF 1034, Public Voucher, to the administrative contracting officer for further processing and transmittal to the disbursing officer; and

(C) Furnishes periodic advisory audit reports directly to the administrative contracting officer.

(1) For contracts placed in Canada, either with the Canadian Commercial Corporation or directly with Canadian suppliers, the Department of National Defence (Canada) will perform any necessary contract quality assurance and/or acceptance, as applicable.

(2) Signature by the Department of National Defence (Canada) quality assurance representative on the DoD inspection and acceptance form is satisfactory evidence of acceptance for payment purposes.

Forward any request for waiver under a cooperative project to the Deputy Secretary of Defense, through the Principal Director, Defense Pricing, Contracting, and Acquisition Policy. The waiver request shall include a draft Determination and Findings for signature by the Deputy Secretary of Defense establishing that the waiver is necessary to significantly further NATO standardization, rationalization, and interoperability.

The cooperative project agreement is the authority for a contractual provision requiring the contractor to place certain subcontracts with particular subcontractors. No separate justification and approval during the acquisition process is required.

(1) Obtain signature of the determination and findings—

(i) At a level above the contracting officer, for acquisitions valued at or below the simplified acquisition threshold; or

(ii) By the chief of the contracting office, for acquisitions with a value greater than the simplified acquisition threshold.

(2) Prepare the determination and findings substantially as follows:

SERVICE OR AGENCY

Exemption of the Buy American and Balance of Payments Program Determination and Findings

Upon the basis of the following findings and determination which I hereby make in accordance with the provisions of FAR 25.103(a), the acquisition of a qualifying country end product may be made as follows:

Findings

1. The (contracting office) proposes to purchase under contract number ________________, (describe item) mined, produced, or manufactured in (qualifying country of origin). The total estimated cost of this acquisition is ____________________.

2. The United States Government and the Government of _____________ have agreed to remove barriers to procurement at the prime and subcontract level for defense equipment produced in each other's countries insofar as laws and regulations permit.

3. The agreement provides that the Department of Defense will evaluate competitive offers of qualifying country end products mined, produced, or manufactured in (qualifying country) without imposing any price differential under the Buy American statute or the Balance of Payments Program and without taking applicable U.S. customs and duties into consideration so that such items may better compete for sales of defense equipment to the Department of Defense. In addition, the Agreement stipulates that acquisitions of such items shall fully satisfy Department of Defense requirements for performance, quality, and delivery and shall cost the Department of Defense no more than would comparable U.S. source or other foreign source defense equipment eligible for award.

4. To achieve the foregoing objectives, the solicitation contained the clause (title and number of the Buy American clause contained in the contract). Offers were solicited from other sources and the offer received from (offeror) is found to be otherwise eligible for award.

Determination

I hereby determine that it is inconsistent with the public interest to apply the restrictions of the Buy American statute or the Balance of Payments Program to the offer described in this determination and findings.

(Date)

(b)(i) When contract administration services are required on contracts to be performed in qualifying countries, direct the request to the cognizant activity listed in the Federal Directory of Contract Administration Services. The cognizant activity also will arrange contract administration services for DoD subcontracts that qualifying country sources place in the United States.

(ii) The contract administration activity receiving a delegation shall determine whether any portions of the delegation are covered by memoranda of understanding annexes and, if so, shall delegate those functions to the appropriate organization in the qualifying country's government.

(1) Send requests for audit services in France, Germany, the Netherlands, or the United Kingdom to the administrative contracting officer at the cognizant activity listed in Section 2B of the Federal Directory of Contract Administration Services. See DFARS 225.870, PGI 225.870-1 , and PGI 225.870-5 for procedures to request audit services for contracts overseen by the Canadian Commercial Corporation.

(2) Complete requests for audit services in France, Germany, the Netherlands, or the United Kingdom using the form and information sheet with form completion instructions available at https://www.dcma.mil/About/Contact-Us/ (click on “International Command”). Links to the form and information sheet are listed under “International Pricing Request.”

(1) The Government of the U.K. shall approve waiver of U.K. levies. When an offeror or contractor identifies a levy included in an offered or contract price, the contracting officer shall provide written notification to the Defense Security Cooperation Agency, ATTN: PSD-PMD, 1111 Jefferson Davis Highway, Arlington, VA 22202-4306, telephone (703) 601-3864. The Defense Security Cooperation Agency will request a waiver of the levy from the Government of the U.K. The notification shall include—

(i) Name of the U.K. firm;

(ii) Prime contract number;

(iii) Description of item for which waiver is being sought;

(iv) Quantity being acquired; and

(v) Amount of levy.

(2) Waiver may occur after contract award. If levies are waived before contract award, evaluate the offer without the levy. If levies are identified but not waived before contract award, evaluate the offer inclusive of the levies.

(a)(1)(ii)(1) The following are examples, not all-inclusive, of Product and Service Codes (PSCs) that contain items of clothing:

(i) Clothing apparel (such as outerwear, headwear, underwear, nightwear, footwear, hosiery, or handwear) listed in PSC 8405, 8410, 8415, 8420, 8425, 8450, or 8475.

(ii) Footwear listed in PSC 8430 or 8435.

(iii) Hosiery, handwear, or other items of clothing apparel, such as belts and suspenders, listed in PSC 8440 or 8445.

(iv) Badges or insignia listed in PSC 8455.

(2) The PSCs listed in paragraph (a)(1)(ii)(1) of this section also contain items that are not clothing, such as—

(i) Visors;

(ii) Kevlar helmets;

(iii) Handbags; and

(iv) Plastic identification tags.

(3) Each item should be individually analyzed to determine if it is clothing, rather than relying on the PSC alone to make that determination.

(4) The fact that an item is excluded from the foreign source restriction of the Berry Amendment applicable to clothing does not preclude application of another Berry Amendment restriction in DFARS 225.7002-1 to the components of the item.

(5) Small arms protective inserts (SAPI plates) are an example of items added to, and not normally associated with, clothing. Therefore, SAPI plates are not covered under the Berry Amendment as clothing. However, fabrics used in the SAPI plate are still subject to the foreign source restrictions of the Berry Amendment. If the fabric used in the SAPI plate is a synthetic fabric or a coated synthetic fabric, the fibers and yarns used in the fabric are not covered by the Berry Amendment, because the fabric is a component of an end product that is not a textile product (see DFARS 225.7002-2(m).

Example: A SAPI plate is compliant with the Berry Amendment if the synthetic fiber or yarn is obtained from foreign country X and woven into synthetic fabric in the United States, which is then incorporated into a SAPI plate manufactured in foreign country Y.

(2) Hand or measuring tools.

(A) As applied to hand or measuring tools, “produced in the United States” means that the hand or measuring tool was assembled in the United States out of components, or otherwise made from raw materials into the finished product that is to be provided to the Government.

(B) If a hand or measuring tool was assembled in a country other than the United States, then disassembled and reassembled in the United States, the hand or measuring tool was not produced in the United States.

(C) The requirement to buy hand or measuring tools produced in the United States does not impose any restriction on the source of the components of the hand or measuring tools. This is unlike the Berry Amendment restriction on clothing (see 225.7002-1 (a)(1)(ii)), which explicitly requires domestic source for the materials and components of clothing (other than unusual components such as sensors or electronics), as well as the additional separate restrictions on various types of fibers and fabrics that might be components of the clothing.

(D) If the acquisition of the hand or measuring tools is also subject to the Buy American statute (see FAR Subpart 25.1), then in order to qualify as a domestic end product, the cost of the components mined, produced, or manufactured in the United States or a qualifying country, must exceed 50 percent of the cost of all the components of the hand or measuring tool.

(b) Domestic nonavailability determinations.

(3) Defense agencies other than the Defense Logistics Agency.

(A) A defense agency requesting a domestic nonavailability determination must submit the request, including the proposed determination, to—

Principal Director, Defense Pricing, Contracting, and Acquisition Policy

ATTN: OUSD(A&S) DPCAP/CP

3060 Defense Pentagon

Washington, DC 20301-3060.

(B) The Principal Director, Defense Pricing, Contracting, and Acquisition Policy, will forward the request to the Under Secretary of Defense (Acquisition and Sustainment) (USD(A&S)) as appropriate.

(b)(2) Report of COTS items.

If a department or agency uses the exception at DFARS 225.7003-3(b)(2) for an acquisition of COTS end items valued at $5 million or more per item, the department or agency shall address use of the exception in a year-end report, to be prepared and submitted as follows:

(A) Entitle the report “COTS Specialty Metal Exceptions Granted During Fiscal Year ____.”

(B) For each excepted COTS item purchased during the fiscal year, include in the report, at a minimum, the applicable—

(1) Contract number and any applicable delivery order number;

(2) Dollar value; and

(3) Item description.

(C) Submit the report by October 31 of each year to:

Principal Director, Defense Pricing, Contracting, and Acquisition Policy

ATTN: OUSD(A&S) DPCAP/CP

3060 Defense Pentagon

Washington, DC 20301-3060.

(4) For samarium-cobalt magnets contained in an item listed in 225.7003-2(a) manufactured in a qualifying country, see paragraph (b)(6)(C) of this section.

(5) Domestic specialty metals nonavailable as and when needed.

(A) Determining availability.

(1) FAR 15.402 requires that contracting officers purchase supplies and services at fair and reasonable prices. Thus, contracting officers must determine whether any increase in contract price that results from providing compliant specialty metal is fair and reasonable, given the circumstances of the particular situation. In those cases where the contracting officer determines that the price would not be fair and reasonable, the Secretary of the military department concerned may use that information in determining whether the unreasonable price causes the compliant metal to be effectively “nonavailable.” Where these “reasonableness” limits should be drawn is a case-by-case decision.

(2) A similar approach may be used to determine whether delays associated with incorporating compliant specialty metals into items being acquired results in the metals being effectively nonavailable.

(B)(1) A department or agency requesting a determination or approval from USD(A&S) in accordance with DFARS 225.7003-3(b)(5) shall submit the request, including the proposed determination, to—

Principal Director, Defense Pricing, Contracting, and Acquisition Policy

ATTN: OUSD(A&S) DPCAP/CP

3060 Defense Pentagon

Washington, DC 20301-3060.

(2) The Principal Director, Defense Pricing, Contracting, and Acquisition Policy (DPCAP), will forward the request to USD(A&S) as appropriate.

(C) For domestic nonavailability determinations with regard to samarium-cobalt high performance magnets, see paragraph (b)(6)(D) of this section.

(6) Application of specialty metals restrictions to magnets.

(A) The two most common types of high performance magnets are samarium-cobalt magnets and neodymium-iron-boron magnets. Only samarium-cobalt magnets contain specialty metals and are subject to the restrictions of 10 U.S.C. 4863 in this section, as well as the restrictions of 10 U.S.C. 4872 at 225.7018 . Neodymium-iron-boron magnets are only subject to the restrictions of 10 U.S.C. 4872 at 225.7018 , because they do not contain specialty metals. There are no other commonly used magnets that contain specialty metals.

(B) Table.

HPM = High performance magnet

COTS = Commercially available off-the-shelf

SmCo = Samarium Cobalt

* By definition, COTS assemblies and COTS end items will not include a HPM that is not commercially available.

(C) Samarium-cobalt magnets contained in an item manufactured in a qualifying country are still subject to the requirements of 10 U.S.C. 4872, because there is no exception in 10 U.S.C. 4872 for items manufactured in a qualifying country comparable to the exception at 225.7003-3 (b)(4) to the specialty metal restrictions of 10 U.S.C. 4863.

(D) Even if samarium-cobalt magnets are determined to be domestically nonavailable under this section, the restrictions of 10 U.S.C. 4872 still apply unless samarium-cobalt magnets melted or produced outside a covered country are also determined to be nonavailable in accordance with 225.7018-4 .

(c) Compliance for commercial derivative military articles.

(i) A department or agency requesting a determination or approval from USD(A&S) in accordance with DFARS 225.7003-3(c) shall submit the request, including the proposed determination, to—

Principal Director, Defense Pricing, Contracting, and Acquisition Policy

ATTN: OUSD(A&S) DPCAP/CP

3060 Defense Pentagon

Washington, DC 20301-3060.

(ii) The Principal Director, DPCAP, will forward the request to USD(A&S) as appropriate.

(d) National security waiver.

(i) A department or agency shall request a national security waiver of the restrictions of 10 U.S.C. 4863 from USD(A&S) in accordance with DFARS 225.7003-3(d) in a timely manner after discovering or being informed of a specialty metals noncompliance in an item, or component thereof, listed at 225.7003-2 (a) and covered by 10 U.S.C. 4863. The department or agency shall submit the request, via the chain of command, including the draft determination and draft letters of notification to the congressional defense committees, as follows:

Principal Director, Defense Pricing, Contracting, and Acquisition Policy

ATTN: OUSD(A&S) DPCAP/CP

3060 Defense Pentagon

Washington, DC 20301-3060

(ii) The request shall include—

(A) The quantity of end items to which the waiver would apply;

(B) The time period that the waiver will cover;

(C) How and when the noncompliance was discovered—

(1) By the subcontractor(s);

(2) By the contractor; and

(3) By the department or agency;

(D) A complete description of all of the items or systems containing noncompliant specialty metals;

(E) The contract number(s), date(s), duration, and subcontractor(s) associated with the noncompliance;

(F) The manufacturer and country of origin of the noncompliant material, if known;

(G) Whether the contractor flowed down the DFARS clause to the subcontractors and in what format (e.g., exact quote or substantially the same?);

(H) A technical description of the affected parts, their role in the larger assembly, and their function in the end item;

(I) Estimated cost and schedule to replace noncompliant parts if a national security waiver is not granted;

(J) Operational and safety implications;

(K) Other national security considerations (such as how the requested waiver will contribute to national security policy or operational security);

(L) A description of the contractor’s efforts to develop and implement a corrective plan to ensure future compliance; and

(M) Information helpful to a determination as to whether any noncompliance was knowing and willful.

(iii) The Director, Defense Procurement and Acquisition Policy, will forward the request to USD(A&S) as appropriate.

(a)(3) Offsets.

(A) Offsets are the entire range of industrial and commercial benefits provided to foreign governments as an inducement or condition to purchase military supplies or services, including benefits such as coproduction, licensed production, subcontracting, technology transfer, in-county procurement, marketing and financial assistance, and joint ventures (Defense Offsets Disclosure Act of 1999, Pub. L. 106-113, section 1243(3)). There are two types of offsets: direct offsets and indirect offsets.

(i) A direct offset involves benefits, including supplies or services that are directly related to the item being purchased. For example, as a condition of a U.S. sale, the contractor may require or agree to permit the purchaser to produce in its country certain components or subsystems of the item being sold. Generally, direct offsets must be performed within a specified period because they are integral to the deliverable of the FMS contract.

(ii) An indirect offset involves benefits, including supplies or services that are unrelated to the item being purchased. For example, as a condition of a sale the contractor may agree to purchase certain of the customer's manufactured products, agricultural commodities, raw materials, or services. Indirect offsets may be accomplished without a clearly defined period of performance.

(B) Offset costs are the costs to the contractor of providing any direct or indirect offsets required (explicitly or implicitly) as a condition of purchase in a government-to-government sale of defense articles and/or defense services as defined by the Arms Export Control Act and the International Traffic in Arms Regulations.

(C) An offset agreement is the contractual arrangement between the FMS customer and the U.S. defense contractor that identifies the offset obligation imposed by the FMS customer that has been accepted by the U.S. defense contractor as a condition of the FMS customer’s purchase. These agreements are distinct and independent of the LOA and the FMS contract. Further information about offsets and LOAs may be found in the Defense Security Cooperation Agency (DSCA) Security Assistance Management Manual (DSCA 5105.38-M), chapter 6, paragraph 6.3.9. (http://samm.dsca.mil/chapter/chapter-6).

(c) When issuing solicitations and contracts for performance in Afghanistan, follow the guidance for CENTCOM Operational Contract Support Policies and Procedures, Theater Business Clearance, at https://www2.centcom.mil/sites/contracts/Pages/GCO.aspx, and use the applicable solicitation provisions and contract clauses:

(1) The provision at DFARS 252.232-7014, Notification of Payment in Local Currency (Afghanistan), as prescribed at DFARS 232.7202.

(b) Subject matter experts for defense industrial base matters are as follows:

For Army: SAAL-PA, Army Industrial Base Policy, telephone 703-695-2488.

For DLA: DLA J-74, Acquisition Programs and Industrial Capabilities Division, telephone 703-767-1427.

For Navy: Ship Programs, DASN Ships, telephone 703-697-1710.

For Air Force: Air Force Research Laboratory, Materials Manufacturing Directorate, telephone 703-588-7777.

For Other Defense Agencies: Personnel at defense agencies without industrial base expertise on staff should contact the Office of the Deputy Assistant Secretary of Defense for Industrial Policy (Acquisition and Sustainment), telephone 703-697-0051.

(c) Determination formats.

(i) Prepare an individual determination and findings substantially as follows:

(ii) Prepare a determination and findings for a class of acquisitions substantially as follows:

(iii) Prepare a determination and findings for acquisitions issued pursuant to https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pd, to Acquire Products and Services Produced in Afghanistan or in Countries along a Major Route of Supply to Afghanistan, substantially as follows:

DEPARTMENT OR AGENCY AUTHORITY TO ACQUIRE PRODUCTS OR SERVICES FROM___________1___________

Determination and Findings

Upon the basis of the following findings and determination, which I hereby make in accordance with the provisions of DFARS 225.7799-2 (DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf), the acquisition of a product or service, other than small arms, in support of operations in Afghanistan may be made as follows:

FINDINGS

1. The ___________1A___________ proposes to purchase under solicitation number _________1B__________, ____________________1C___________________. The total estimated cost of this acquisition is _____ 1D_____.

2. The product or service is to be used by ________________2_________________.

3. The contracting officer recommends conducting the acquisition using the following procedure, which, given this determination, is authorized by section 801 of Public Law 111-84, as amended by section 886 of Public Law 114-92 and section 1212 of Public Law 116-92, and section 886 of Public Law 110-181, as amended by section 842 of Public Law 112-239 and section 886 of Public Law 114-92:_____________________________________3______________________________.

4. To implement the recommended procedure, the solicitation will contain: a. DFARS 252.225-7998, Preference for Products or Services from Afghanistan, a Central Asian state, Pakistan, or the South Caucasus (DEC 2019) (DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf), and DFARS 252.225-7999, Requirement for Products or Services from Afghanistan, a Central Asian state, Pakistan, or the South Caucasus (DEC 2019) (DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf); or b. DFARS 252.225-7996, Acquisition Restricted to Products or Services from Afghanistan, a Central Asian state, Pakistan, or the South Caucasus (DEC 2019) (DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf).

5. The proposed acquisition will provide a product or service that is to be used ____________________________5________________________________________.

6.a. For products or services from Afghanistan, a Central Asian state, Pakistan, or the South Caucasus, it is in the national security interest of the United States to use a procedure specified in 225.7799-1(a)(DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf) because the procedure is necessary to ____________________________6A________________________________.

Use of the procedure for acquisition of products or services from Afghanistan, a Central Asian state, Pakistan, or the South Caucasus will not adversely affect military or stability operations in Afghanistan or the United States industrial base (see 6B).

b. For products or services from Afghanistan, it is in the national security interest of the United States to use a procedure specified in 225.7799-1(a)(DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf) because the procedure is necessary to provide a stable source of jobs in Afghanistan.

Use of the procedure for acquisition of products or services from Afghanistan will not adversely affect military or stability operations in Afghanistan or the United States industrial base (see 6B). (see 6C)

7. Acquisitions conducted using the procedures specified in DFARS 225.7799-1(a) (DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf), (see para. 3. above), are authorized to use other than full and open competition procedures and do not require the justification and approval addressed in FAR Subpart 6.3.

8. Requirement will be/was synopsized: YES [___] NO [___]. If not synopsized, exception at FAR 5.202(a) applies.

___________________________________ Date:_____________

CONTRACTING OFFICER

Name:______________________

Office Symbol: _______________

DETERMINATION

In accordance with the authorization outlined in DFARS 225.7799-2(b)(1)(i)(DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf) and under the authority of section 801 of Public Law 111-84, as amended by section 886 of Public Law 114-92 and section 1212 of Public Law 116-92, and section 886 of Public Law 110-181, as amended by section 842 of Public Law 112-239 and section 886 of Public Law 114-02, I hereby determine that it is in the national security interest of the United States to use the acquisition procedure described above because the procedure is necessary to encourage countries along a major route of supply in support of military and stability operations in Afghanistan. This procedure will not adversely affect military or stability operations in Afghanistan or the United States industrial base.

___________________________________ Date:_____________

INSTRUCTIONS FOR COMPLETING DETERMINATION

1 Afghanistan, a Central Asian state, Pakistan, or the South Caucasus

1A Office symbol of your contracting office

1B RFP/RFQ/IFB number

1C Description of the items to be purchased

1D Estimated amount of the requirement (in USD)

2 Describe the entity(ies) that are the intended user(s) of the product or service

3 Select and include one of the following:

a. Provide a preference for products or services from Afghanistan, a Central Asian state, Pakistan, or the South Caucasus in accordance with the evaluation procedures at 225.7799-3 (DEVIATION https://www.acq.osd.mil/dpap/policy/policyvault/Class_Deviation_2020-O0002.pdf). b. Limit competition to products or services from Afghanistan, a Central Asian state, Pakistan, or the South Caucasus DEVIATION 2020-O0002).

5 Select and include one of the following:

In the country that is the source of the product or service.

In the course of efforts by the United States and the Forces to ship goods to or from Afghanistan in support of operations in Afghanistan.

By the military forces, police, or other security personnel of Afghanistan.

By the United States or coalition forces in Afghanistan.

6Ai Paragraph (6.a. may be deleted if the product or service is for use by the military forces, police, or other security personnel of Afghanistan.

6Aii Select and include one of the following:

Reduce the overall United States transportation costs and risks in shipping goods in support of operations in Afghanistan.

Encourage states of Central Asia, Pakistan, and the South Caucasus to cooperate in expanding supply routes through their territory in support of operations in Afghanistan.

Help develop more robust and enduring routes of supply to or from Afghanistan.

6B The contracting officer generally may presume that there will not be an adverse effect on the U.S. industrial base. However, when in doubt the contracting officer should coordinate with the applicable subject matter experts.

6C Delete paragraph 6.b. if the product or service concerned is to be used only by the military forces, police, or other security personnel of Afghanistan.

7 Include a description of efforts made to ensure offers are solicited from as many potential sources as is practicable.

(1) DoD Focal Point on Export Controls.

(i) Within DoD, the focal point on export controls is the Defense Technology Security Administration (DTSA). Official authorities and responsibilities of DTSA are established in DoD Directive 5105.72.

(ii) Initial DoD acquisition workforce questions regarding the applicability of the Export Administration Regulations (EAR) or the International Traffic in Arms Regulations (ITAR) to specific procurements or items, or interpretation of DoD issuances regarding export controls, may be directed to the DTSA Policy Directorate, by phone at 571-372-2438/2377 or by visiting the DTSA web site at: http://www.dtsa.mil/SitePages/contact-us/default.aspx.

(2) Regulations. The Department of State and the Department of Commerce are the lead agencies responsible for regulations governing the export of defense articles, commercial products or commercial services, and dual use items.

(i) The International Traffic in Arms Regulations (ITAR), issued by the Department of State, control the export of defense-related articles and services, including technical data, ensuring compliance with the Arms Export Control Act (22 U.S.C. 2751 et seq.). The United States Munitions List (USML) identifies defense articles, services, and related technical data that are inherently military in character and could, if exported, jeopardize national security or foreign policy interests of the United States.

(A) The ITAR is published in Title 22 of the Code of Federal Regulations (CFR), Parts 120 through 130 (22 CFR 120-130). The official version of the ITAR is maintained at http://www.gpoaccess.gov/cfr/index.html. The Department of State also maintains an on-line version at http://www.pmddtc.state.gov/regulations_laws/itar_official.html.

(B) The USML is part of the ITAR, in 22 CFR Part 121, and is available at the web sites in paragraph (2) (i) (A) of this section.

(C) The Department of State is responsible for compliance with the ITAR. Depending on the nature of questions you may have, you may contact the following Department of State office to obtain additional information:

U.S. Department of State

Bureau of Political Military Affairs

Directorate of Defense Trade Controls

Office of Defense Trade Controls Compliance

http://www.pmddtc.state.gov/about/contact_information.html.

(D) Contracting officers should not answer any questions a contractor may ask regarding how to comply with the ITAR. If asked, the contracting officer should direct the contractor’s attention to paragraph (c) of the clause at DFARS 252.225-7048 and may inform the contractor that the Department of State publishes guidance regarding ITAR compliance at http://www.pmddtc.state.gov/compliance/index.html.

(E) Contracting officers should not answer any questions a contractor may ask regarding the State Department requirement, mentioned in the clause at 252.225-7048, for contractors to register with the Department of State in accordance with the ITAR. If asked, the contracting officer should direct the contractor’s attention to paragraph (b) of the clause, which directs the contractor to consult with the Department of State regarding any questions relating to compliance with the ITAR. (The registration requirements are in Subpart 122.1 of the ITAR. Subpart 122.1 requires any person who engages in the United States in the business of either manufacturing or exporting defense articles or furnishing defense services to register with the Directorate of Defense Trade Controls.)

(ii) The Export Administration Regulations (EAR), issued by the Department of Commerce, control the export of dual-use items, (items that have both commercial and military or proliferation applications) and purely commercial products or commercial services. These items include commodities, software, and technology. Many items subject to the EAR are set forth by Export Control Classification Number on the Commerce Control List.

(A) The EAR is published in Title 15 of the Code of Federal Regulations, Parts 730 through 774 (15 CFR Parts 730-774), available at http://www.gpoaccess.gov/cfr/index.html and http://www.access.gpo.gov/bis/ear/ear_data.html.

(B) The Commerce Control List is part of the EAR, in Supplement No. 1 to 15 CFR Part 774, and is available at http://www.gpoaccess.gov/cfr/index.html and http://www.access.gpo.gov/bis/ear/ear_data.html.

(C) The Department of Commerce is responsible for compliance with the EAR. Depending on the nature of questions you may have, you may contact the following Department of Commerce office to obtain additional information:

U.S. Department of Commerce

Bureau of Industry and Security

Office of Exporter Services (OExS)

OExS Hotline: 202-482-4811.

(D) Contracting officers should not answer any questions a contractor may ask regarding how to comply with the EAR. If asked, the contracting officer should direct the contractor’s attention to paragraph (b) of the clause at DFARS 252.225-7048 and may inform the contractor that the Department of Commerce publishes guidance regarding EAR compliance at http://www.bis.doc.gov/.

(3) National Security Decision Directive (NSDD) 189, National Policy on the Transfer of Scientific, Technical, and Engineering Information.

(i) NSDD 189 establishes a national policy that, to the maximum extent possible, the products of fundamental research shall remain unrestricted. NSDD 189 provides that no restrictions may be placed upon the conduct or reporting of federally funded fundamental research that has not received national security classification, except as provided in applicable U.S. statutes. As a result, contracts confined to the performance of unclassified fundamental research generally do not involve any export-controlled items, as defined in paragraph (a) of the clause at DFARS 252.225-7048.

(ii) NSDD 189 does not take precedence over statutes. NSDD 189 does not exempt any research, whether basic, fundamental, or applied, from statutes that apply to export controls such as the Arms Export Control Act, the Export Administration Act of 1979, as amended, or the U.S. International Emergency Economic Powers Act, or the regulations that implement those statutes (the ITAR and the EAR). Thus, if export-controlled items are used to conduct research or are generated as part of the research efforts, the export control laws and regulations apply to the controlled items.

(iii) NSDD 189 is available at http://www.fas.org/irp/offdocs/nsdd/nsdd-189.htm.

(4) DoD Instruction 2040.02, International Transfers of Technology, Articles, and Services. This DoD instruction provides guidance to manage and control transfers of technology, articles, and services consistent with U.S. foreign policy and national security objectives. DoD Instruction 2040.02 is available at http://www.dtic.mil/whs/directives/.

(5) Other DoD Issuances. Other DoD issuances that address export control matters include those listed below. Except as otherwise noted, these issuances are available at http://www.dtic.mil/whs/directives/.

• DoD Instruction 2015.4, Defense Research, Development, Test and Evaluation (RDT&E) Information Exchange Program (IEP).

• DoD Directive 5000.1, The Defense Acquisition System.

• DoD Instruction 5000.2, Operation of the Defense Acquisition System.

• DoD Directive 5105.72, Defense Technology Security Administration (DTSA).

• DoD Publication 5200.1-M, Acquisition Systems Protection Program.

• DoD Instruction 5200.39, Critical Program Information (CPI) Protection Within the Department of Defense.

• DoD Publication 5220.22-M, National Industrial Security Program Operating Manual (NISPOM).

• DoD Directive 5230.25, Withholding of Unclassified Technical Data From Public Disclosure.

• DoD Instruction 5230.27, Presentation of DoD-Related Scientific and Technical Papers at Meetings.

• Defense Acquisition Guidebook, available at http://akss.dau.mil/dag/DoD5000.asp?view=document&doc=1.

• Under Secretary of Defense (Intelligence) Memorandum, Subject: Policy and Procedures for Sanitization of Department of Defense (DoD) Classified or Controlled Unclassified Information Prior to Public Release, is available here

Link to online training on export controls:

CLM 036 Technology Transfer and Export Control Fundamentals, http://icatalog.dau.mil/onlinecatalog/courses.aspx?crs_id=306

(1) Background.

(i) The U.S. Government controls exports of defense articles, technical data, and defense services. The controls are imposed by the Arms Export Control Act (AECA) and the Department of State regulation that implements the AECA export controls. That regulation is the ITAR. See PGI 204.7302(2)(i) for more information about the ITAR.

(ii) Under the ITAR, the Department of State manages an export licensing system in which government approvals are often necessary for companies to hold discussions about potential projects, pursue joint activities, ship hardware, or transfer know-how to one another, and even sometimes to move engineers and other personnel within branches of the same company located in different countries. This process can be challenging for U.S. exporters and for foreign firms in their supply chains.

(iii) Given the close allied relationship of the United States with Australia and the United Kingdom, the President and the respective Prime Ministers decided to reform the defense trade system between their countries with the goal of facilitating the exchange of certain defense articles, technical data, and defense services between their militaries and security authorities, and their industries. They negotiated bilateral Defense Trade Cooperation DTC Treaties to achieve this goal. These bilateral DTC Treaties establish permissions for export without export licenses for each country, if an export meets the DTC Treaty requirements.

Other exports remain under the AECA and the ITAR. The DTC Treaties are intended solely to waive certain requirements of the ITAR for specific transactions within the scope of the DTC Treaties not remove any requirements for contractors to comply with domestic U.S. law.

(iv) The Department of State regulations implementing the DTC Treaties are in the ITAR.

(2) How the DTC Treaties work.

(i) The DTC Treaties establish Approved Communities. The “Approved Community” for each DTC Treaty is defined in DFARS clause 252.225-7047. Exports of most U.S. defense articles, technical data, and defense services are permitted to go into and to move within the Approved Community, without the need for government approvals and export licenses (provided that all persons comply with statutory and regulatory requirements outside of DFARS and ITAR concerning the import of defense articles and defense services or the possession or transfer of defense articles, including, but not limited to, regulations issued by the Bureau of Alcohol, Tobacco, Firearms and Explosives found at 27 C.F.R. Parts 447, 478, and 479, which are unaffected by the DTC Treaties) when in support of the following:

• Combined U.S.-Australia or U.S.-U.K. military or counterterrorism operations.

• U.S.-Australia or U.S.-U.K. cooperative security and defense research, development, production, and support programs.

• Specific security and defense projects that are for the government of Australia or the government of the United Kingdom use only.

• U.S. Government end use.

(ii) Under the DTC Treaties, instead of a U.S. exporter preparing and requesting Department of State approval of an export license or other written authorization for a project, the exporter may elect to use the applicable DTC Treaty if Treaty conditions are met. If using a DTC Treaty, the exporter will check the Department of State website (http://pmddtc.state.gov/) or other appropriate reference and verify that—

• The Australian or U.K. partner is on the list of approved companies/facilities (i.e., a member of the Approved Community);

• The effort is in support of at least one of the scope areas identified in paragraph (2)(i) of this section; and

• The defense article is not on the exempted technology list. (Also in 22 CFR 126 Supplement No. 1).

If all three conditions are met, then the U.S. exporter and the Australian or U.K. partner may use the DTC Treaty exemptions in the ITAR to move qualifying defense articles without the need to obtain export licenses or other written authorizations, provided compliance with paragraph (2)(i) of this section.

(iii) A company using a DTC Treaty, in addition to checking the three lists (as explained in paragraph (2)(ii) of this section), must also comply with requirements in the applicable DTC Treaty and the associated Implementing Arrangements, and the provisions of the ITAR pertaining to the DTC Treaty. These include marking and record keeping requirements to ensure that export-controlled items are recognized as such and treated accordingly. For example, instead of normal ITAR requirements, the provisions of the ITAR pertaining to the DTC Treaties establish the requirements that apply. Similarly, DFARS 225.7902 implements requirements that relate to exports that a prospective contractor may make under a DoD solicitation or that a contractor may make in performance of a DoD contract.

The company must continue to comply with domestic laws and regulations, including those pertaining to the movement of defense articles within the United States.

(1) Since the DTC Treaties apply only to eligible items, a solicitation or contract falls within the scope of the DTC Treaties, and is thus eligible for DTC Treaty coverage (i.e., falls within the scope of the DTC Treaties) if it will acquire at least one defense article that is not otherwise exempt from the DTC Treaties and is required for—

(i) Combined military or counterterrorism operations as described in the Implementing Arrangements;

(ii) Cooperative security and defense research, development, production, and support programs that are identified pursuant to the Implementing Arrangements;

(iii) Cases where the government or Australia or the government of the United Kingdom is the end user in mutually agreed specific security and defense projects, that are identified pursuant to the Implementing Arrangements; or

(iv) U.S. Government end use under a solicitation or contract.

(2) Since the DTC Treaties apply only to eligible items, a solicitation or contract falls within the scope of the DTC Treaties and is thus eligible for DTC Treaty coverage when it will acquire at least one defense article that is DTC Treaty-eligible and the contract falls within the scope of the DTC Treaties. Article 3, section (2) of each DTC Treaty and Section 4 of each Implementing Arrangement require the DTC Treaty Participants to maintain lists of defense articles to be exempted from the scope of the DTC Treaties. These exempted technology lists are incorporated in Supplement No. 1 to part of the ITAR and are accessible at: http://www.pmddtc.state.gov/treaties/index.html

(3) The DTC Treaties do not apply to defense articles initially being acquired pursuant to the U.S. Foreign Military Sales (FMS) program, although, once the defense articles are acquired by the Australia or United Kingdom under an FMS case, the DTC Treaty applies as though the defense articles were exported under the DTC Treaty, subject to PGI 225.7902-2 .

(4) If a company obtains an export license, or other authorization, for the export of defense articles that might otherwise have been eligible for export without a license under a DTC Treaty, the terms of the export license, or other authorization, shall apply unless and until the company obtains approval to transition to DTC Treaty coverage. The process and requirements for transition are described in 22 CFR 126.16(i) and 22 CFR 126.17(i), respectively.